1 | Water Pump | 1 | Power and current input | 0507 | GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB 4706.66-2008 Household and similar electrical appliances—Safety—Particular requirements for pumps | |
2 | Leakage current |
1 | Water Pump | 3 | electric strength | 0507 | GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB 4706.66-2008 Household and similar electrical appliances—Safety—Particular requirements for pumps | |
4 | Earth resistance |
5 | Temperature Rises |
6 | pump total head | GB/T 3216-2005 Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 and 2 | Accredited only for : Measured by liquid pole |
7 | pump flow rate | GB/T 3214-2007 Methods for measurement of capacity of pump | Accredited only for : Measured by weighing or volume calculation |
2 | Aerator/ Air Pump | 1 | Power and current input | 0507 | GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB 4706.67-2008 Household and similar electrical appliances—Safety—Particular requirements for electrical appliances for use with aquariums and garden ponds | |
2 | Leakage current |
3 | electric strength |
4 | Earth resistance |
5 | Temperature Rises |
3 | Heater | 1 | Power and current input | 0507 | GB 4706.1-1998 Household and similar electrical appliances—Safety—Part 1:General requirements GB 4706.77-2004 Household and similar electrical appliances—Safety—Particular requirements for portable immersion heaters | |
2 | Leakage current |
3 | electric strength |
4 | electric and electric products | 1 | Dry heat | 0431 | GB/T2423.2-2008 Environmental testing for electric and electronic products--Part 2:Test methods--Tests B: Dry heat | Accredited only for :Temperature range:≤150℃ |
2 | Cold | GB/T2423.1-2008 Environmental testing for electric and electronic products--Part 2:Test methods--Tests A:Cold | Accredited only for : Temperature range:≥-40℃ |
4 | electric and electric products | 3 | Damp heat steady state | 0431 | GB/T2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat,steady state | |
4 | Sait mist Test | GB/T 2423.17-2008 Environmental testing for electric and electronic products---Part 2:Test methods---Test Ka : Salt mist | Accredited only for :Maximum test size:≤0.15 M3 |
5 | Testing for transport packages | GB/T4857.7-2005 Packaging—Basic tests for transport packages—Part 7:Sinusoidal vibration test method at constant frequency | Accredited only for : Sinusoidal Vibration at constant frequency:Acceleration : 0.4~1.1 g wingt amplitude:25.4 mm |
6 | Testing for Protection | GB4208-2008 Degrees of protection provided by enclosure (IP code) | Accredited only for : IPX3-IPX4 ; IPX7-IPX8 |